Power floc
Bioguard
Do you have a water clarity problem?
Use Powerfloc to restore your water clarity by flocculating particles that cause cloudiness, haze and water discoloration. This product coagulates debris and quickly drops it to the bottom of the pool so that it can be easily vacuumed out.
Powerfloc:
- Clears excessively cloudy water commonly associated with algae blooms.
- Particles settle to your pool’s bottom for vacuum removal.
- The more debris in the water the faster it works.
- It doesn't affect PH.
- Can be used in all pool types, filter types and sanitizing programs.
Instructions:
- Shake well before using.
- Make sure the filter is cleaned.
- For best results, adjust your pH between 7.4 and 8.0.
- Use 100 mL per 10,000 L of swimming pool water.
- Slowly pour Power Floc directly into the skimmer while the pump is running.
- Make sure that the filter dial is in the CIRCULATION / RECYCLING position.
- Allow the pump to circulate for 2 hours to distribute evenly over the surface of the water.
- Close the pump.
- Allow the product to drop debris to the bottom of the pool for 12-24 hours (the greater the amount of debris, the faster the product works).
- Vacuum to waste all settled debris with the filter dial valve in WASTE or DRAIN.
- Backwash and clean filter. Resume normal filter cycle.
CAUTION: DO NOT VACUUM DEBRIS THROUGH THE FILTER.
NOTE: Power Floc can also be used weekly to help and maintain sparkling water. To do this, use 20 mL of the product per 10,000 L of water.
Size : 946 ml
